VIN / Build Split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GK (GMC SUV), 1GT (GMC truck). Position 8 = engine code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2017 GMC Acadia Supported Services
2017 GMC Acadia
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform C1XX (2nd Gen Acadia)
- CAN Architecture GMLAN (HS-CAN 500kbps + MS-CAN 33.3kbps); OBD2 DLC Pin 6/14 HS-CAN 500kbps
- Security GM PASS-Key III+ - BCM transponder, RKE 315MHz 128-bit rolling code; no OBD pin extraction; AKL via GDS2 + TIS2WEB dealer authorization
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2017 GMC Acadia. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this C1XX (2nd Gen Acadia) platform vehicle, GM PASS-Key III+ immobilizer support, GMC IntelliLink infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
C1XX (2nd Gen Acadia)
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
GMLAN (HS-CAN 500kbps + MS-CAN 33.3kbps); OBD2 DLC Pin 6/14 HS-CAN 500kbps
YEAR-SPECIFIC NOTES
Infotainment
GMC IntelliLink
Exact-year service summary for 2017 GMC Acadia
ADAS coverage
This 2017 GMC Acadia page documents 5 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement (if Forward Camera Equipped), Forward Camera Replacement, Forward Radar Replacement, and BZA Rear Radar Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 37 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 11 gateway, immobilizer, or key-security records for this 2017 GMC Acadia.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2017 GMC Acadia using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Available SLT+/Denali: Forward Collision Alert/Automatic Emergency Braking, Lane - Available; Platform: C1XX (2nd Gen Acadia) - Confirmed
Driver-assist suite
Available SLT+/Denali: Forward Collision Alert/Automatic Emergency Braking, Lane Change Alert w/Blind Spot Monitoring, Rear Cross-Traffic Alert, HD Rear Camera; Lane Keep Assist (Denali)
VIN and build split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GK (GMC SUV), 1GT (GMC truck). Position 8 = engine code. Position 10 = model year code.
Infotainment context
GMC IntelliLink; GMC Infotainment 3 - 7" or 8" touchscreen; Apple CarPlay + Android Auto (SLE2+)
Network and access
CAN: GMLAN (HS-CAN 500kbps + MS-CAN 33.3kbps); OBD2 DLC Pin 6/14 HS-CAN 500kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
GM GDS2 / GM Tech2Win / GM MDI 2
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2017 GMC Acadia. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
6 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
17 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
4 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
3 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
12 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Available SLT+/Denali: Forward Collision Alert/Automatic Emergency Braking, Lane
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: C1XX (2nd Gen Acadia)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common GMC Acadia issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - C1XX (2nd Gen Acadia) platform uses GMLAN (HS-CAN 500kbps + MS-CAN 33.3kbps); OBD2 DLC Pin 6/14 HS-CAN 500kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Available SLT+/Denali: Forward Collision Alert/Automatic Emergency Braking, Lane Change Alert w/Blind Spot Monitoring, Rear Cross-Traffic Alert, HD Rear Camera; Lane Keep Assist (Denali)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Camera | ADAS Camera | Static | YES | 84390 (APPROX - VERIFY GMDB BY VIN) | |
| Forward Radar (77GHz) | Radar | ADAS Radar | Static | YES | 84277 (APPROX - VERIFY GMDB) | |
| Blind Spot Monitor Sensor - Left (BSM) | Radar | ADAS Radar | Static + Dynamic | YES | 23234 (APPROX - VERIFY GMDB) | |
| Blind Spot Monitor Sensor - Right (BSM) | Radar | ADAS Radar | Static + Dynamic | YES | 23234 | |
| HD Rear Camera | Camera | Rear Vision | None (registration only) | YES | 84393 (APPROX - VERIFY GMDB) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement (if Forward Camera Equipped) Affected: Forward Camera, FCA, LKA
Forward camera static calibration via GDS2. Level surface. GM forward target chart at WSM-specified distance. Confirm FCA and Lane Keep Assist DTC-free post-cal.
Forward Camera Replacement Affected: Forward Camera, FCA, LKA
GDS2 camera initialization + static calibration. Verify bracket not damaged. Confirm FCA and LKA operational.
Forward Radar Replacement Affected: Forward Radar, FCA, Adaptive Cruise
GDS2 radar alignment. Level surface, no metallic obstructions. Verify Adaptive Cruise and AEB DTC-free.
BZA Rear Radar Replacement Affected: BZA, RCTA
GDS2 BZA initialization. Fixed mount - no physical aiming. DTC clear. Road verify 20+ mph.
BCM Replacement Affected: BCM, PASS-Key III+, Remote Start, BSM
SPS programming (TIS2WEB) + VIN tie + all vehicle options + PASS-Key III+ relearn with all keys present.
ECM Replacement Affected: ECM, PASS-Key III+, Throttle
SPS programming + VIN tie + PASS-Key parameter transfer + idle/throttle relearn. 3.6L: cam phaser relearn.
EBCM Replacement Affected: ABS, StabiliTrak, SAS
GDS2 ABS/ESC initialization + 4-wheel brake bleed + SAS zero-point calibration. Drive straight 35+ mph.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using GDS2/MDI2.
Front Bumper Repair or Replacement
Forward radar angular alignment required after front bumper R&R. Use GDS2/MDI2.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use GDS2/MDI2.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using GDS2/MDI2.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS2/MDI2 if applicable.
SRS Modules
Sensing & Diagnostic Module (SDM) 17 records
Under center console
- Part number
- 13523859
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13547603
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84216834
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84216835
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13502577
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 86805565
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 86805566
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13513516
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 25828898
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84005321
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84005322
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13574936
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 23248441
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 23248442
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 87862686
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 87862691
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13513519
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU Modules
ECM - LCV 2.5L I4 12669 (APPROX - VERIFY GMDB BY VIN)
- Part number
- 12669 (APPROX - VERIFY GMDB BY VIN)
- Protocol / method
- SPS / TIS2WEB
- Coding required
- Yes
- Cloning supported
- No
- Notes
- SPS programming via TIS2WEB. VIN tie required. PASS-Key III+ security parameter transfer. Throttle body relearn. Idle relearn via GDS2.
ECM - 3.6L V6 (LGX) 12670 (APPROX - VERIFY GMDB BY VIN)
- Part number
- 12670 (APPROX - VERIFY GMDB BY VIN)
- Protocol / method
- SPS / TIS2WEB
- Coding required
- Yes
- Cloning supported
- No
- Notes
- SPS programming via TIS2WEB. VIN tie. PASS-Key III+ parameter transfer. Cam phaser relearn via GDS2. Injector balance rate reset. Idle relearn.
TCM - 6-Speed or 9-Speed Automatic 24285 OR 24284 (VERIFY GMDB BY ENGINE
- Part number
- 24285 OR 24284 (VERIFY GMDB BY ENGINE
- Protocol / method
- GDS2 quick learn + SPS if required
- Coding required
- Yes
- Cloning supported
- No
- Notes
- GDS2 TCM quick learn after replacement. Adaptive data reset. Verify shift quality on road test. 2.5L uses 6-speed; 3.6L AWD uses 9-speed - verify transmission by RPO.
EBCM (Electronic Brake Control Module) 84 (CONTINENTAL - VERIFY GMDB)
- Part number
- 84 (CONTINENTAL - VERIFY GMDB)
- Protocol / method
- GDS2
- Coding required
- Yes
- Cloning supported
- No
- Notes
- GDS2 ABS/StabiliTrak initialization + brake bleed + SAS zero-point calibration. Drive straight 35+ mph on level surface after reset.
BCM Modules
Body Control Module (BCM) 84392 (APPROX - VERIFY GMDB)
- Part number
- 84392 (APPROX - VERIFY GMDB)
- Security
- PASS-Key III+
- Coding required
- Yes
- Cloning supported
- No
- Notes
- SPS programming via TIS2WEB required after replacement. Configure all vehicle options in BCM calibration via GDS2 (trailer prep, heated seats, remote start, BSM). VIN tie required.
HVAC Control Module 84 (VERIFY GMDB)
- Part number
- 84 (VERIFY GMDB)
- Security
- None
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Dual-zone auto climate (SLT+/Denali). GDS2 HVAC actuator calibration after replacement. Verify all zones operational.
EBCM (Electronic Brake Control Module) 84 (CONTINENTAL - VERIFY GMDB)
- Part number
- 84 (CONTINENTAL - VERIFY GMDB)
- Security
- None
- Coding required
- Yes
- Cloning supported
- No
- Notes
- GDS2 ABS/ESC initialization + brake bleed + SAS zero-point calibration after replacement.
TCU / TCM Transmission Modules
TCU - 6T70 6-Speed Auto 24256494
- Part number
- 24256494
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- Requires TIS2WEB programming, transmission relearn procedure, Dexron VI ATF, shift adapt reset via Tech2/MDI
TCU - 6T75 6-Speed Auto 24256495
- Part number
- 24256495
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- Requires TIS2WEB programming, transmission relearn procedure, Dexron VI ATF, shift adapt reset via Tech2/MDI
ABS / Brake Modules
Electronic Brake Control Module (EBCM) 84 (CONTINENTAL - VERIFY GMDB)
- Part number
- 84 (CONTINENTAL - VERIFY GMDB)
- Cloning supported
- No
- Notes
- GDS2 ABS/ESC initialization + 4-wheel brake bleed + SAS zero-point calibration. Drive straight 35+ mph. StabiliTrak warning remains until SAS learning completes.
Wheel Speed Sensor - Front (each) 13512 (APPROX - VERIFY GMDB)
- Part number
- 13512 (APPROX - VERIFY GMDB)
- Cloning supported
- No
- Notes
- Active magnetic. Torque to spec. GDS2 DTC clear + road test 15+ mph.
Wheel Speed Sensor - Rear (each) 13512 REAR VARIANT (VERIFY GMDB)
- Part number
- 13512 REAR VARIANT (VERIFY GMDB)
- Cloning supported
- No
- Notes
- Same procedure as front WSS.
Brake Pressure Modulator (HCU) 84 (VERIFY GMDB)
- Part number
- 84 (VERIFY GMDB)
- Cloning supported
- No
- Notes
- GDS2 automated bleed preferred. Verify firm pedal before road test.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 84216549
- Part number
- 84216549
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 84216550
- Part number
- 84216550
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
OnStar Module (if equipped) 84 (VERIFY GMDB)
- Part number
- 84 (VERIFY GMDB)
- Notes
- GDS2 OnStar initialization. Active OnStar subscription required for remote features. Modem VIN-tied.
Trailer Prep Package (if equipped)
- Notes
- Acadia towing capacity up to 4,000 lbs with 3.6L V6. BCM configuration for trailer prep. 7-pin connector verify.
Remote Start (OEM RKE-based) (BCM PARAMETER - RPO UF8)
- Part number
- (BCM PARAMETER - RPO UF8)
- Notes
- BCM AsBuilt parameter for remote start. GDS2 BCM configuration. RKE 315MHz fob sequence.
Gateway / Security Modules
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3558(read-write)
- Notes
- Compatibility label: Buick. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 2015- 1M12S
- Notes
- Compatibility label: CRUZE. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 2015- 1M12S
- Notes
- Compatibility label: Cavalier. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3385(read-write)
- Notes
- Compatibility label: Chevrolet. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 2015- 1M12S
- Notes
- Compatibility label: Excelle. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
Central Gateway Module
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 2015- 1M12S
- Notes
- Compatibility label: SAIL. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Unibody - High-Strength Steel; Aluminum hood on select trims
- OBD Protocol
- ISO 15765-4 CAN (500 kbps HS-CAN)
- CAN Architecture
- GMLAN (HS-CAN 500kbps + MS-CAN 33.3kbps); OBD2 DLC Pin 6/14 HS-CAN 500kbps
- Infotainment
- GMC Infotainment 3 - 7" or 8" touchscreen; Apple CarPlay + Android Auto (SLE2+)
- OTA Capable
- No
- Infotainment Name
- GMC IntelliLink
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2017 - 2.0T, 2.5i, 3.6 V6.
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2017 GMC Acadia?
ADAS calibration pricing for a 2017 GMC Acadia depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and HD Rear Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2017 GMC Acadia?
Yes. The 2017 GMC Acadia uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 13523859. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2017 GMC Acadia?
After windshield replacement on a 2017 GMC Acadia, Forward Camera (Monocular), Forward Radar (77GHz), and HD Rear Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2017 GMC Acadia module service take?
Most 2017 GMC Acadia onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 29 programmable modules documented in our database (4 ECU, 3 BCM, 2 TCU, 4 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2017 GMC Acadia on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2017 GMC Acadia. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2017 GMC Acadia programming?
Every programming, cloning, and calibration job on the 2017 GMC Acadia is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2017 GMC Acadia can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2017 GMC Acadia. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 4 ABS / brake control (EBCM)
- 3 immobilizer / security
- 2 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 5 ADAS module
Infotainment on this platform: GMC IntelliLink. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2017 GMC Acadia covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 84277099, 84347922
- ECU / PCM Part Numbers
- 12680532, 12680533
- BCM / Body Module Part Numbers
- 84392 (APPROX - VERIFY GMDB), 84 (VERIFY GMDB), 84 (CONTINENTAL - VERIFY GMDB)
- TCU / TCM Part Numbers
- 24256494, 24256495
- SRS / Airbag Module Part Numbers
- 13523859, 13547603, 84216834, 84216835, 13502577, 86805565, 86805566, 13513516, 25828898, 84005321, 84005322, 13574936, 23248441, 23248442, 87862686, 87862691, 13513519
- ABS / EBCM Part Numbers
- 84344557, 84344558
- Instrument Cluster (IPC) Part Numbers
- 84216549, 84216550
- Transmission Control Module (TCM) Part Numbers
- 24256494, 24256495
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2017 GMC Acadia
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
GM SPS2 Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.