No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.
2007 GMC Acadia Supported Services
2007 GMC Acadia
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2007 GMC Acadia. Mobile service is available in the Dallas/Fort Worth service area; mail-in is temporarily unavailable.
Technical snapshot
PlatformLambda (1st Gen, 2008-2017)
CAN ArchitectureHS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
SecurityGM PASSKey III / PassLock II (BCM security seed); resistor pellet or PassLock cylinder sensor; PIN via Tech 2 or GDS2; AKL requires BCM relearn procedure + security PIN
Expert ADAS calibration, module programming, and diagnostic recovery for the 2007 GMC Acadia. On this vehicle we cover documented systems include No Factory ADAS Systems, this Lambda (1st Gen, 2008-2017) platform vehicle, PK3/PK3+ / PEPS immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2007 GMC Acadia using the documented module data on this page.
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
25865649Under center console
PART
25865649
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
87862686Under center console
PART
87862686
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
25888797Under center console
PART
25888797
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
25872515Under center console
PART
25872515
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
25828898Under center console
PART
25828898
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
25758127Under center console
PART
25758127
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
23248441Under center console
PART
23248441
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
25954278Under center console
PART
25954278
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU MODULES
ECU Modules
Engine Control Module (ECM) - 3.6L LY7 V619210736
PART
19210736
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
19210736 is the current service part; supersedes original 12605843. Lambda platform (shared with Buick Enclave, Saturn Outlook). 2007 Acadia uses port-injected LY7 (not direct-injection LLT). Sibling: Chevrolet Traverse (2009+, post-2007 Lambda).
GMC AM/FM stereo; CD player; OnStar; Bluetooth (select trims); Aux input
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed Reviewed coverage: 2007 - 3.6L V6, 3.6L V6 24v (LGX), 3.6L V6 24v (LLT), 3.6L V6 24v (LY7). Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2007 GMC Acadia?
ADAS calibration pricing for a 2007 GMC Acadia depends on which of its 1 documented systems need work after a repair. This vehicle is documented with No Factory ADAS Systems. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2007 GMC Acadia?
Yes. The 2007 GMC Acadia uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 15271622. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2007 GMC Acadia?
After windshield replacement on a 2007 GMC Acadia, the forward-facing ADAS camera typically requires recalibration before lane-keep, pre-collision, and adaptive-cruise systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2007 GMC Acadia module service take?
Most 2007 GMC Acadia onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 19 programmable modules documented in our database (1 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2007 GMC Acadia on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2007 GMC Acadia. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2007 GMC Acadia programming?
Every programming, cloning, and calibration job on the 2007 GMC Acadia is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2007 GMC Acadia with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2007 GMC Acadia. Immobilizer generation on this platform: PK3/PK3+ / PEPS. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2007 GMC Acadia can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2007 GMC Acadia. For this vehicle our database documents:
1 engine control (ECU/PCM)
2 transmission control (TCU/TCM)
1 body control (BCM and related)
3 ABS / brake control (EBCM)
1 immobilizer / security
2 key & fob
2 steering angle sensor (SAS)
1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2007 GMC Acadia covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.