We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
3rd Gen - 2024-2026 generation coverage
2024-2026 Chevrolet Traverse service guide ADAS Calibration & Module Programming
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
22 documented Chevrolet Traverse module records across the 2024-2026 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
ECM - 3.6L V6 LFY Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- SPS / TIS2WEB
- Coding required
- Yes
- Cloning supported
- No
- Notes
- SPS programming via TIS2WEB + VIN tie + PASS-Key parameter transfer. AFM adaptation reset + cam phaser relearn after ECM swap.
ECM - 2.0L Turbo LSY (2018-2022) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- SPS / TIS2WEB
- Coding required
- Yes
- Cloning supported
- No
- Notes
- SPS programming via TIS2WEB + VIN tie + PASS-Key parameter transfer.
TCM / Transmission
TCU - 9T50 9-Speed Auto Verify by VIN 2024-2025 84632
Documented for 2024-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 84632
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental MPC5777C
- Notes
- Requires GM MDI/GDS2 programming. TCM relearn via Tech2Win. Dexron VI ATF. VIN security coding mandatory.
TCU - 9T50 9-Speed Auto Verify by VIN 2026 84632
Documented for 2026 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2026
Donor must match part family 84632 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 84632
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental TC1797
- Notes
- TDS2 tool required, adaptive relearn via 30-mile drive cycle, DEXRON VI ATF, VIN coding mandatory
BCM / Body electronics
Body Control Module (BCM) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Security
- PASS-Key III+
- Coding required
- Yes
- Cloning supported
- No
- Notes
- SPS programming via TIS2WEB required after replacement. VIN tie + all vehicle options configuration. PASS-Key III+ relearn all customer keys. Verify all body functions: locks, windows, lights, remote start.
SRS / Airbag
Sensing & Diagnostic Module (SDM) 7 records
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 13514198
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 13524239
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 85134209
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 13524236
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 84216834
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 85134207
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 84216835
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ABS / Brakes
Electronic Brake Control Module (EBCM) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Cloning supported
- No
- Notes
- GDS2 ABS/ESC initialization + 4-wheel brake bleed + SAS zero-point calibration.
Other modules
Instrument Panel Cluster (IPC) Bench clone required 84X
Module information indicates cloning or bench work.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Donor must match part family 84X - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 84X
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (SCM clock spring)
Connectivity / Accessories
OnStar Module Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- GDS2 initialization. Active OnStar subscription required for OTA, remote features.
Reference information for 2024-2026. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- Chevrolet Traverse
- Model years
- 2024-2026
- Generation
- 3rd Gen
- Platform
- GM C1XX (updated)
Tools we use for this vehicle
Factory scan, coding, and calibration access
GM GDS2 / GM Tech2Win / GM MDI 2
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (7 documented rows)
- Read codes on ECU systems (2 documented rows)
- Read codes on BCM systems (1 documented row)
- Read codes on TCU / TCM systems (2 documented rows)
- Read codes on ABS systems (1 documented row)
- Read codes on IPC / SAS systems (2 documented rows)
- Read codes on Gateway systems (6 documented rows)
- Read codes on Keys systems (1 documented row)
- Read codes on Immobilizer systems (1 documented row)
- Read codes on Accessory systems (1 documented row)
Limitations
- IPC / SAS programming, coding, cloning, or security work (1 documented row)
- Gateway programming, coding, cloning, or security work (6 documented rows)
- Keys programming, coding, cloning, or security work (1 documented row)
- Immobilizer programming, coding, cloning, or security work (1 documented row)
Professional scan tool
View capabilities and limitations
Supported work
- Keys OBD coding support (1 documented row)
Limitations
- IPC / SAS bench, clone, or dealer security rows (1 documented row)
- Gateway bench, clone, or dealer security rows (6 documented rows)
- Immobilizer bench, clone, or dealer security rows (1 documented row)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Bench programmer
View capabilities and limitations
Supported work
- IPC / SAS bench clone rows (1 documented row)
Dealer or specialist
View capabilities and limitations
Supported work
- Gateway dealer security rows (6 documented rows)
- Immobilizer dealer security rows (1 documented row)
Dealer security and specialist module work should be scoped by VIN before you buy parts or pay for programming.
Get a QuoteKnow this platform
This platform uses HS-CAN (500 kbps); GM LAN; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps); GM LAN; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - 2024 outside openpilot year range (2022-2023)
Not in openpilot support tree as of April 2026. Supported years: 2022-2023. 2024+ not confirmed.
Generation service summary for Chevrolet Traverse 3rd Gen (2024-2026)
Generation coverage
This page consolidates Chevrolet Traverse service data for 2024-2026 across 3 model years; service information is available for 3 years.
Choose a yearADAS coverage
Merged ADAS coverage includes 5 system records, including Forward Camera (Monocular), Forward Radar (Bosch MRR, 77GHz), Blind Spot Monitor (Aptiv SRR, 24GHz), and Rear View Camera. Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 8 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 22 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the Chevrolet Traverse 2024-2026 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteDo I need calibration?
Windshield Replacement (Camera Equipped) 1
2024-2026
required
GDS2 forward camera static calibration required. Level surface, WSM target distance.
Forward Camera Replacement 1
2024-2026
required
GDS2 static calibration mandatory. DTC clear post-calibration.
Front Bumper Repair or Replacement 1
2024-2026
required
GDS2 forward radar alignment required if radar equipped.
Rear Bumper Repair or Replacement 1
2024-2026
required
GDS2 BSM/RCTA initialization if equipped. Dynamic verification.
Airbag/SRS Deployment 1
2024-2026
required
SDM replacement only (no crash clear). GDS2 SRS initialization.
BCM Replacement 1
2024-2026
required
SPS TIS2WEB programming + PASS-Key relearn all keys + all body options config.
ECM Replacement 1
2024-2026
required
SPS TIS2WEB + VIN tie + PASS-Key transfer.
EBCM Replacement 1
2024-2026
required
GDS2 ABS init + 4-wheel bleed + SAS zero-point.
ADAS calibration requirements
14 calibration requirements are documented for this generation.
6 static, 4 dynamic or drive-cycle, and 5 not-required rows. Verify exact equipment and repair event by VIN before setup.
Driver Monitoring Camera
Steering Column
Systems: Direct Driver Monitoring System
Trigger: Component service
Forward Range Radar Module / Radar Sensor Module - Long Range
Bumper - Front
Systems: Adaptive Cruise Control, Automatic Emergency Braking, Forward Collision Warning
Trigger: R&R, R&I
Setup: Scan Tool, Shop Built / Supplied Tools
Front View Driver Information Camera / Frontview Camera
Grille
Systems: Surround View Camera
Trigger: R&R
Setup: Scan Tool
Image Processing Module / Active Safety Control Module
Quarter Panel - Interior (Left)
Systems: Adaptive Cruise Control, Automatic Emergency Braking, Direct Driver Monitoring System, Forward Collision Warning, Lane Departure Warning, Lane Keeping Assistance, Parking Collision Warning, Reverse Automatic Emergency Braking
Trigger: R&R
Setup: Scan Tool, Shop Built / Supplied Tools, Vehicle Dynamic Sensor calibration required if Image Processing Module is replaced on models with UKL
Parking Assist Alarm Sensor / Parking Assist Object Sensor
Bumper - Rear
Systems: Parking Collision Warning
Trigger: Component service
Parking Assist Control Module / Object Alarm Module
Quarter Panel - Interior (Right)
Systems: Parking Collision Warning
Trigger: R&R
Setup: Scan Tool, Shop Built / Supplied Tools
Rear View Driver Information Camera (With Surround Vision)
Decklid / Liftgate / Tailgate
Systems: Surround View Camera, Trailer Assistance
Trigger: R&R
Setup: Scan Tool
Rear View Driver Information Camera (Without Surround Vision)
Decklid / Liftgate / Tailgate
Systems: Backup Camera
Trigger: Component service
Rearview Mirror Camera
Decklid / Liftgate / Tailgate
Systems: Rear Vision Enhancement
Trigger: Component service
Seat Lane Departure Warning Actuator / Safety Alert Seat
Seat
Systems: Blind Spot Warning, Forward Collision Warning, Lane Departure Warning, Lane Keeping Assistance, Parking Collision Warning, Rear Cross Traffic Warning
Trigger: Component service
Short Range Radar Sensor(s)
Bumper - Front and Rear
Systems: Adaptive Cruise Control, Automatic Emergency Braking, Forward Collision Warning, Reverse Automatic Emergency Braking
Trigger: R&R
Setup: Scan Tool, Shop Built / Supplied Tools
Side Object Sensing Alert Module / Side Object Sensor Module
Bumper - Rear
Systems: Blind Spot Warning, Lane Change Alert, Rear Cross Traffic Warning
Trigger: R&R
Setup: Scan Tool, Shop Built / Supplied Tools, SPS programming required after replacement
Side View Driver Information Camera
Side Mirror(s)
Systems: Surround View Camera
Trigger: R&R
Setup: Scan Tool
Steering Angle Sensor
Steering Column
Systems: Lane Keeping Assistance, Performing Wheel Alignment May Necessitate Calibrations Affecting ADAS Function
Trigger: R&R, Wheel Alignment
Setup: Scan Tool
Year-by-year details
| Year | Trim notes |
|---|---|
| 2024 | Standard trim configurations for 2024 Chevrolet Traverse; verify trim-specific options before ordering modules. |
| 2025 | Standard trim configurations for 2025 Chevrolet Traverse; verify trim-specific options before ordering modules. |
| 2026 | Standard trim configurations for 2026 Chevrolet Traverse; verify trim-specific options before ordering modules. |
What changes across 2024-2026
Differences versus the generation reference. Years not listed here match the shared platform data on this page.
2025
- Trims: Standard trim configurations for 2025 Chevrolet Traverse; verify trim-specific options before ordering modules.
2026
- Trims: Standard trim configurations for 2026 Chevrolet Traverse; verify trim-specific options before ordering modules.
5 ADAS systems documented across the 2024-2026 generation. Rows that apply to only part of the generation carries a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Chevy Safety Assist: Forward Collision Alert, Automatic Emergency Braking, Lane Keep Assist, Blind Zone Alert, Rear Cross Traffic Alert, Rear Park Assist; Super Cruise available 2024+ (hands-free highway L2)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR, 77GHz) | Forward Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor (Aptiv SRR, 24GHz) | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - | |
| Rear Cross Traffic Alert (RCTA) | Side Radar | Radar | Static + Dynamic | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement (Camera Equipped)
GDS2 forward camera static calibration required. Level surface, WSM target distance.
Forward Camera Replacement
GDS2 static calibration mandatory. DTC clear post-calibration.
Front Bumper Repair or Replacement
GDS2 forward radar alignment required if radar equipped.
Rear Bumper Repair or Replacement
GDS2 BSM/RCTA initialization if equipped. Dynamic verification.
Airbag/SRS Deployment
SDM replacement only (no crash clear). GDS2 SRS initialization.
BCM Replacement
SPS TIS2WEB programming + PASS-Key relearn all keys + all body options config.
ECM Replacement
SPS TIS2WEB + VIN tie + PASS-Key transfer.
EBCM Replacement
GDS2 ABS init + 4-wheel bleed + SAS zero-point.
Module part numbers by generation
1 full part number across 1 module group for this generation.
Body Control Module
-
135594862024 Traverse FWD L4-2.5L Turbo
8 gateway, immobilizer, and security items documented across the 2024-2026 generation.
Gateway / Security Modules
Central Gateway Module Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3585
- Notes
- Compatibility label: Chevrolet. Air conditioning Notes: Read/Write
Central Gateway Module Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3558
- Notes
- Compatibility label: Buick. BCM Notes: Read/Write
Central Gateway Module Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- Various / Unlisted
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 1M12S
- Notes
- Compatibility label: CRUZE. BCM Notes: Years: 2015-
Central Gateway Module Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- Various / Unlisted
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 1M12S
- Notes
- Compatibility label: Cavalier. BCM Notes: Years: 2015-
Central Gateway Module Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- Various / Unlisted
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 1M12S
- Notes
- Compatibility label: Excelle. BCM Notes: Years: 2015-
Central Gateway Module Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2024, 2025, 2026
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- Various / Unlisted
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 1M12S
- Notes
- Compatibility label: SAIL. BCM Notes: Years: 2015-
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- High-strength steel unibody
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps); GM LAN; OBD2 DLC Pin 6/14
- Infotainment
- Chevy Infotainment 3 Plus 17.7" diagonal (2024+); Apple CarPlay/Android Auto; OTA via OnStar
- OTA Capable
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
WHAT WE RESOLVE
3rd Gen (2024-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Monocular), Forward Radar (Bosch MRR, 77GHz), Blind Spot Monitor (Aptiv SRR, 24GHz), and Rear View Camera. Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Sensing & Diagnostic Module (SDM). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Chevrolet Traverse (2024-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Chevrolet Traverse (2024-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Chevrolet Traverse (2024-2026)?
The Chevrolet Traverse (2024-2026) generation currently shows 13 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include Sensing & Diagnostic Module (SDM). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 13514198 - confirm for your exact year/VIN.
Does Chevrolet Traverse (2024-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 5 ADAS systems, including Forward Camera (Monocular), Forward Radar (Bosch MRR, 77GHz), Blind Spot Monitor (Aptiv SRR, 24GHz), Rear View Camera, and Rear Cross Traffic Alert (RCTA). Calibration triggers include Windshield Replacement (Camera Equipped), Forward Camera Replacement, Front Bumper Repair or Replacement, and Rear Bumper Repair or Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Chevrolet Traverse (2024-2026)?
Yes. The generation data includes 7 SRS records, including Sensing & Diagnostic Module (SDM). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 13514198 - confirm for your exact year/VIN.
Do all Chevrolet Traverse (2024-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2024-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for Chevrolet Traverse (2024-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is Chevrolet Traverse (2024-2026) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More Traverse generations
2nd Gen (C1XX) 2018-2023 3rd Gen 2024-2026 You are here
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
GM SPS2 Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.