VIN / Build Split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GY (Cadillac). Position 8 = engine code. Position 10 = model year code.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065ADAS, Module Repair & Programming
Standard trim configurations for 2012 Cadillac Escalade; verify trim-specific options before ordering modules.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2012 Cadillac Escalade. On this vehicle we cover documented systems include Rear View Camera, Forward Camera (Monocular), and Side Blind Zone Alert (SBZA/BSM), this GMT900 (3rd Gen, 2007-2014) platform vehicle, PK3/PK3+ / PEPS immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GY (Cadillac). Position 8 = engine code. Position 10 = model year code.
This 2012 Cadillac Escalade page documents 3 ADAS systems, including Rear View Camera, Forward Camera (Monocular), and Side Blind Zone Alert (SBZA/BSM).
View ADAS dataDocumented calibration triggers include PCM Replacement, EBCM Replacement, Windshield Replacement, and Forward Camera Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 58 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 9 gateway, immobilizer, or key-security records for this 2012 Cadillac Escalade.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2012 Cadillac Escalade using the documented systems and module data on this page.
Choose a sectionImmobilizer: PK3/PK3+ / PEPS - Standard; Platform: GMT900 (3rd Gen, 2007-2014) - Confirmed
No standard ADAS suite - pre-Safety Assist generation. Optional Adaptive Cruise Control and Forward Collision Alert on upper trims.
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GY (Cadillac). Position 8 = engine code. Position 10 = model year code.
Cadillac CUE (Cadillac User Experience) - 8-inch capacitive touchscreen, haptic controls; prone to screen delamination pre-2017
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Choose a section to view data
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Verify platform code matches when cross-referencing part numbers across model years.
Common Cadillac Escalade issues we resolve on this platform: Rear View Camera, Forward Camera (Monocular), and Side Blind Zone Alert (SBZA/BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - GMT900 (3rd Gen, 2007-2014) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - PK3/PK3+ / PEPS immobilizer; all-keys-lost supported.
Documented for the 3rd Gen GMT900 - includes this 2012 model year. Open the full coverage on the generation guide.
ADAS calibration pricing for a 2012 Cadillac Escalade depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Rear View Camera, Forward Camera (Monocular), and Side Blind Zone Alert (SBZA/BSM). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.
Yes. The 2012 Cadillac Escalade uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 84308907. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.
After windshield replacement on a 2012 Cadillac Escalade, Rear View Camera and Forward Camera (Monocular) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.
Most 2012 Cadillac Escalade jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 21 programmable modules documented in our database (1 ECU, 1 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.
Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2012 Cadillac Escalade.
Every programming, cloning, and calibration job on the 2012 Cadillac Escalade is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Yes - all-keys-lost is supported on the 2012 Cadillac Escalade. Immobilizer generation on this platform: PK3/PK3+ / PEPS. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
We program, clone, repair, or replace the full programmable-module stack on a 2012 Cadillac Escalade. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Send your VIN and we'll confirm exact module support and pricing for your specific vehicle within 4 hours.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.