Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Audi A6 C6 (2005-2011) ADAS Calibration & Module Programming
Covers model years 2005-2011 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Audi A6 built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
PlatformC6 (3rd Gen, 2005-2011)
CAN ArchitectureHS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
The ADAS, module, and security rows below are consolidated across the full 2005-2011 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2005-2011”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2005 Audi A6. On this vehicle we cover documented systems include No Factory ADAS Systems, this C6 (3rd Gen, 2005-2011) platform vehicle, MQB/MLB IMMO immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Merged ADAS coverage includes 6 system records, including No Factory ADAS Systems (2005), No Factory ADAS Systems (2006), No Factory ADAS Systems (2007), and Adaptive Cruise Control Sensor (2008-2011). Year-marked systems apply only to the shown range.
The merged generation page indexes 36 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Audi A6 2005-2011 span, with exact-year validation before service.
Always match the full part number before buying a used module.
PART
4F0-959-655-G
LOCATION
Under center console
MFG
Continental
CHIP/MCU
95640
NOTES
Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
ECU MODULES
ECU Modules
Engine Control Module (Siemens SIMOS 6.2) - 3.2 FSI BKHx4
4F1 910 559 BVerify by VIN2005J2534
_years covers only 2005 for this generation
Used/donor module guide
Compatible donor years: 2005
Always match the full part number before buying a used module.
PART
4F1 910 559 B
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Siemens SIMOS 6.2
NOTES
2005 Audi A6 C6 3.2L quattro BKH SW PN 4F1 910 559 B with HW PN 4F1 907 559 A confirmed on Amazon listing and audiworld.com forum thread (2005 Audi A6-3.2L quattro BKH). Siemens VDO 5WP4500706. SIMOS 6.2 platform (NOT Bosch MED9.1 as briefing suggested). Cartech Electronics confirms SIMOS 6.2 for A6 3.2L family with HW 4F1907559 / SW 4F1910559. | Sources: https://www.amazon.com/Engine-Control-Module-Compatible-4F1910559B/dp/B0GL4RWRS1 | Alt PN: 4F1910559B
4F1 910 559 NVerify by VIN2006J2534
_years covers only 2006 for this generation
Used/donor module guide
Compatible donor years: 2006
Always match the full part number before buying a used module.
PART
4F1 910 559 N
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Siemens SIMOS 6.2
NOTES
2006 Audi A6 3.2 FSI BKH SW 4F1 910 559 N with HW 4F1 907 559 confirmed on auto24parts.com. Siemens VDO 5WP4503706. SIMOS 6.2 platform. Different sw suffix from 2005 (B vs N) reflecting production-year calibration revisions. | Sources: https://auto24parts.com/en_GB/p/ECU-ENGINE-CONTROLLER-AUDI-A4-A6-3.2-FSI-SIEMENS-VDO-5WP45037-06%2C-5WP4503706%2C-4F1-907-559%2C-4F1907559%2C-4F1910559N-/82345 | Alt PN: 4F1910559N
4F1 910 559 EVerify by VIN2007J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PART
4F1 910 559 E
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Siemens SIMOS 6.2
NOTES
2007-2008 Audi A6 3.2L ECU 4F1 910 559 E confirmed on eBay OEM listing (07-08 AUDI A6 3.2L ECU ECM COMPUTER 4F1 910 559 E). HW 4F1 907 559 A. SIMOS 6.2. | Sources: https://www.ebay.com/itm/156001904504 | Alt PN: 4F1910559E
4F1 910 559 EVerify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
4F1 910 559 E
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Siemens SIMOS 6.2
NOTES
2008 Audi A6 3.2L ECU same 4F1 910 559 E family as 2007. eBay OEM listing covers 07-08 range. 2008 was final year for BKH before facelift A6 (2009 onwards introduced new engine variants). | Sources: https://www.ebay.com/itm/156001904504 | Alt PN: 4F1910559E
Engine Control Module (Bosch MED9.1.1) - 4.2 FSI BATx2
4F0 907 559Verify by VIN2005J2534
_years covers only 2005 for this generation
Used/donor module guide
Compatible donor years: 2005
Always match the full part number before buying a used module.
PART
4F0 907 559
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Bosch MED9.1.1
NOTES
2005 Audi A6 C6 4.2 BAT V8 ECU complete kit PN 4F0 907 559 (HW) / 4F0 910 560 (SW) Bosch ref 0 261 208 363 confirmed on pieces-okaz.com. Note: Cartech Electronics shows 4F0907559 / 4F0910560C with Bosch 0261208729 as ME7.1.1 (older A6 5V V8). MED9.1.1 BAT 4.2 FSI V8 launched in 2005 C6. Dynoshare documents 4F1907560 / 4F1910560R for 4.2 FSI V8 4V Bosch MED9.1.1. Verify 4F0 vs 4F1 prefix by VIN. | Sources: https://pieces-okaz.com/en/audi/25954-ecu-engine-complete-start-kit-audi-a6-c6-42-bat-4f0907559-4f0910560-bosch-0261208363.html | Alt PN: 4F0907559
4F0 907 559Verify by VIN2006J2534
_years covers only 2006 for this generation
Used/donor module guide
Compatible donor years: 2006
Always match the full part number before buying a used module.
PART
4F0 907 559
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Bosch MED9.1.1
NOTES
2006 Audi A6 C6 4.2 BAT V8 - audizine forum example documents HW 4F0 907 559 with SW 4F0 910 560 E. Bosch MED9.1.1. Same family as 2005. | Sources: https://www.audizine.com/threads/2006-audi-a6-4-2-mmi-dead.848056/ | Alt PN: 4F0907559 | Confidence: medium
Engine Control Module (Bosch MED9.1.1) - 4.2 FSI BVJx3
4F0 907 559Verify by VIN2007J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PART
4F0 907 559
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Bosch MED9.1.1
NOTES
2007 Audi A6 C6 4.2 FSI V8 4V (BVJ engine, late C6 production replaced BAT) Bosch MED9.1.1. Dynoshare tuning database documents HW 4F1 907 560 / SW 4F1 910 560 R Bosch ref 0 261 S02 704 (note shift from 4F0 to 4F1 prefix on later production). VIN-specific verification required. | Sources: https://dynoshare.com/chip-tuning-files/audi-a6-c6-4f-4-2-fsi-v8-4v-bosch-med9-1-1-4f1907560-0261s02704-505073-4f1910560r_0040/ | Alt PN: 4F0907559 | Confidence: medium
4F1 907 560Verify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
4F1 907 560
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Bosch MED9.1.1
NOTES
2008 Audi A6 4.2 FSI BVJ Bosch MED9.1.1. Dynoshare HW 4F1 907 560 SW 4F1 910 560 R Bosch 0 261 S02 704. | Sources: https://dynoshare.com/chip-tuning-files/audi-a6-c6-4f-4-2-fsi-v8-4v-bosch-med9-1-1-4f1907560-0261s02704-505073-4f1910560r_0040/ | Alt PN: 4F1907560 | Confidence: medium
4F1 907 560Verify by VIN2009J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
4F1 907 560
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Bosch MED9.1.1
NOTES
2009 Audi A6 facelift 4.2 FSI V8 BVJ same MED9.1.1 family. 2009 marked final A6 4.2 V8 year (replaced by 3.0 TFSI supercharged in C7 2012). Audi S6 5.2L V10 (BXA) was separate platform with MED9.1 and 4F1 910 552 T family per cartechelectronics. | Sources: https://dynoshare.com/chip-tuning-files/audi-a6-c6-4f-4-2-fsi-v8-4v-bosch-med9-1-1-4f1907560-0261s02704-505073-4f1910560r_0040/ | Alt PN: 4F1907560 | Confidence: medium
Donor must match part family 4F0 920 930 - requires cloning
Always match the full part number before buying a used module.
PART
4F0 920 930, 4F0 920 950
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Donor must match part family 4G0 920 930 - requires cloning
Always match the full part number before buying a used module.
PART
4G0 920 930, 4G0 920 950
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)Verify by VIN2010-2011
_years covers only 2010-2011 for this generation
Used/donor module guide
Compatible donor years: 2010, 2011
Always match the full part number before buying a used module.
CODING
Yes
NOTES
INTEGRATED (J527 clock spring/coil)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
MMI Touch Response Dual Touchscreen (MIB3)Verify by VIN4K0-035
coding and programming fields are absent or ambiguous
Always match the full part number before buying a used module.
PART
4K0-035
NOTES
ODIS SVM coding required. OTA updates standard. Apple CarPlay / Android Auto standard. Verify part suffix and availability for 2024 build via ODIS VIN.
Virtual Cockpit Plus J285 (C8)Verify by VIN4K0-920
coding and programming fields are absent or ambiguous
Audi MMI 2G (6.5" retractable display); Bluetooth; CD; AM/FM; navigation available
OTA Capable
No
ECU Unlock Supported
No
Custom Programming
Yes
WHAT WE RESOLVE
C6 (2005-2011) common module and ADAS issues
ADAS calibration driftWatch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include No Factory ADAS Systems (2005), No Factory ADAS Systems (2006), No Factory ADAS Systems (2007), and Adaptive Cruise Control Sensor (2008-2011). Year-marked systems apply only to the shown range.
SRS crash-data and warning lightSRS service can involve Airbag Control Unit (ACU). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
Replacement module setupECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
Gateway, key, and immobilizer accessGateway, key, and immobilizer procedures are represented by 6 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
Shared module fitment
Vehicles sharing these modules
These vehicles use one or more indexed replacement modules from this generation.
Yes. Core Auto Logic supports generation-scoped module programming for the Audi A6 (2005-2011). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Audi A6 (2005-2011)?
The Audi A6 (2005-2011) generation currently shows 27 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Unit (ACU). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 4F0-959-655 - confirm for your exact year/VIN.
Does Audi A6 (2005-2011) need ADAS calibration after glass or collision work?
The merged generation data documents 6 ADAS systems, including No Factory ADAS Systems (2005), No Factory ADAS Systems (2006), No Factory ADAS Systems (2007), Adaptive Cruise Control Sensor (2008-2011), and Rear View Camera (2009). Calibration triggers include ECM Replacement and ABS/ESC Module Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Audi A6 (2005-2011)?
Yes. The generation data includes 2 SRS records, including Airbag Control Unit (ACU). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 4F0-959-655 - confirm for your exact year/VIN.
Do all Audi A6 (2005-2011) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2005-2011; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Audi A6 (2005-2011)?
Yes, where the VIN and security workflow support it. The generation data includes 6 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Audi A6 (2005-2011)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Audi A6 (2005-2011) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.